With pole dancing expanding from clubs and dance studios to keep fit leisure centres and even into the bedroom, more and more people are taking up pole dancing.
For work leisure, or pleasure – the choice is yours. The Polestar range of professional quality dance poles are equally suited to use in clubs, gyms, dance studios or around the home.
Manufactured from 51mm (2”) polished stainless steel tube our dance poles are designed (subject to correct and secure fitting) to be used for a full range of dance routines, moves and tricks - limited only by your ability.
All dance poles are cut to size to suit the customer’s ceiling height and are dispatched in heavy-duty cardboard tubes on an overnight carrier service, with delivery normally within 2 to 4 (working) days from receipt of order.
- Benefit your students by helping them buy a top quality dance pole to practise at home
- Benefit your school by earning commission on every dance pole sold.
Polestar completely removable – no screws or fixings required
Polestar Semi Removable removable pole with a fixed ceiling mounting
Polestar Plus completely removable no screws or fixings – but with additional adjustment
Polestar Club permanently fitted with fixed floor and ceiling mounting
Polestar Split portable two piece pole, completely removable – no screw fixings required
Polestar Twist completely removable spinning pole - converts to a static pole in seconds
Polestar Club Twist permanently fitted spinning pole - converts to a static pole in seconds
Our most popular pole, completely removable without the need for screws or permanent fixings.
Quick and easy to install and remove, simply start by fitting the adjustable foot and ceiling plate to the pole. Locate the pole in position* and after ensuring that the pole is vertical, adjust the foot at the bottom of the pole with the spanners provided. This extends the pole, clamping it safely in position between floor and ceiling.
On ceiling heights over 3m (10ft) heavy duty tube is supplied as standard for additional rigidity. On ceiling heights up to 3m, heavy duty tube is available as an additional cost option.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Ceiling plate
Adjustable foot
Polestar Features
- Quick and easy to install and remove
- Rigid one piece design
- Polished stainless steel tube
- 51mm (2”) diameter tube
- Completely removable
- No drilling
- No screws
- No permanent fixing
A fully removable pole with a permanently installed top mounting that is screwed to the ceiling*. Once the ceiling mounting is fitted the pole is quick and easy to install and remove.
Simply insert the adjustable foot into the bottom of the pole, locate the top of the pole into the ceiling mounting and after ensuring that the pole is vertical adjust the foot at the bottom of the pole with the spanners provided. This extends the pole clamping it safely in position between floor and ceiling.
On ceiling heights over 3m (10ft) heavy duty tube is supplied as standard for additional rigidity. On ceiling heights up to 3m, heavy duty tube is available as an additional cost option.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Ceiling mounting
Adjustable foot
Polestar Semi Removable Features
- Rigid one piece design
- Polished stainless steel tube
- 51mm (2”) diameter tube
- Removable pole
- Permanent ceiling fixing
- Quick and easy to install and remove
Completely removable without the need for screws or permanent fixings and with additional 400mm (16”) of adjustment provided at the top of the pole to accommodate variations in ceiling heights.
Quick and easy to install and remove, the pole is assembled by fitting the adjustable foot, top adjuster and ceiling plate to the pole. The top adjuster is then adjusted as required to suit the ceiling height.
The pole is then located in position*, and after ensuring the pole is vertical, adjust the foot at the bottom of the pole with the spanners provided. This extends the pole, clamping it safely in position between floor and ceiling.
On ceiling heights over 3.4m (11ft 4in), heavy duty tube is supplied as standard for additional rigidity. On ceiling heights up to 3.4m heavy duty tube is available as an additional cost option.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Top adjuster & ceiling plate
Adjustable foot
Polestar Plus Features
- Completely removable
- No drilling
- No screws
- An additional 400mm of adjustment
- No permanent fixing
- Quick and easy to install and remove
- Rigid one piece design
- Polished stainless steel tube
- 51mm (2”) diameter tube
The traditional style of fixed pole, for permanent installation with flange fittings that are screw fixed to both floor and ceiling. On plasterboard ceilings the pole must be located directly beneath a ceiling joist.
On ceiling heights over 3m (10ft) heavy duty tube is supplied as standard for additional rigidity. On ceiling heights up to 3m, heavy duty tube is available as an additional cost option.
Ceiling mounting
Floor Fitting
Polestar Club Features
- Polished stainless steel tube
- 51mm (2”) diameter tube
- Rigid one piece design
- Floor and ceiling fittings for permanent install.
A portable two piece pole which is completely removable without the need for screws or permanent fixings.
Quick and easy to install and remove, simply slot the two sections of pole together then fit the adjustable foot and ceiling plate and locate the pole in position*. Ensuring that the pole is vertical, adjust the foot at the bottom of the pole with the spanners provided. This extends the pole clamping it safely in position between floor and ceiling.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Ceiling plate
Adjustable foot
Join
Spigot
Polestar Split Features
- No permanent fixing
- Quick and easy to install and remove
- Polished stainless steel tube
- 51mm (2”) diameter tube
- Completely removable
- Portable two piece pole
- No drilling
- No screws
An “American style” rotating or spinning pole that can be converted into a static pole in seconds and is completely removable without the need for screws or permanent fixings.
The top and bottom fittings house roller thrust bearings, which allow smooth and free rotation of the pole. The rotation can also be locked making the pole static by simply locating a locking pin into the bottom fitting.
Quick and easy to install and remove the pole is assembled by screwing the adjustable foot into the bottom of the pole and fitting the bottom bearing plate and top ceiling plate to the ends of the pole.
The pole can then be located in position* and after ensuring that the pole is vertical, the adjustable leg at the bottom of the pole is adjusted with the spanners provided. This extends the pole clamping it safely in position between floor and ceiling.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Ceiling mounting
Floor Mounting
Polestar Twist Features
- Roller thrust bearings for smooth rotation
- Floor and ceiling fittings for permanent install
- Heavy duty one piece pole for rigidity
- 51mm (2”) diameter tube
- Spinning pole
- Completely removable
- No drilling, screws or permanent fixings
- Converts to a static pole in seconds
- Polished stainless steel tube
An “American style” rotating or spinning pole that can be converted into a static dance pole in seconds.
The top and bottom fittings that are screw fixed to the floor and ceiling for permanent installation*, house roller thrust bearings, which allow smooth and free rotation of the pole.
The rotation of the pole can also be locked making the pole static by simply locating a locking pin into the bottom fitting.
(*On plasterboard type ceilings the pole must be located directly beneath a ceiling joist.)
Ceiling mounting
Floor Mounting
Polestar Club Twist Features
- Floor and ceiling fittings for permanent install
- Heavy duty one piece pole for rigidity
- 51mm (2”) diameter tube
- Spinning dance pole
- Converts to a static dance pole in seconds
- Roller thrust bearings for smooth rotation
- Polished stainless steel tube
Returns Policy
Any dance pole supplied that has been cut to the wrong size because of our error will be replaced F.O.C.
If the wrong type of dance pole is supplied due to our error, it will be replaced F.O.C.
If a dance pole is found to have been damaged in transit, it will be replaced F.O.C. as long as the damage is reported immediately to us (certainly no later than 24 hours after receipt). It is up to the customer to inspect the goods as soon as they are delivered and where possible, sign the carrier’s paperwork as “possibly damaged”. This is especially important if the packaging appears to be damaged in any way because, in reality, the carrier will not wait whilst the pole is unpacked and inspected.
If a dance pole is supplied as ordered but is subsequently found to be the wrong length due to the customer’s error, it will be replaced subject to the customer paying the two subsequent carriage charges (i.e. in respect of returning the wrong pole and the supply of the replacement pole). In addition, there will be a 15% handling / re-cutting charge levied in respect of the original cost of the dance pole. This is subject to the dance pole being returned in the same condition that it was sent out in and that the dance pole is of a length that can readily be re-sold to another customer (i.e. not too short).
If a dance pole is supplied as ordered but is subsequently found to be unsuitable, it can be returned for credit against the cost of the dance pole (excluding delivery charges) subject to the customer paying the return carriage charge and a 15% handling / re-cutting charge being levied in respect of the original cost of the pole. This is subject to the dance pole being returned in the same condition that it was sent out in and that the pole is of a length that can readily be re-sold to another customer (i.e. not too short).
Back To Top